UltraTech Hi-Flex Waterproofing Coat 12kg

UltraTech Hi-Flex Waterproofing Coat 12kg is a flexible polymer-based waterproofing coating designed for positive-side waterproofing applications. It is a two-component, cement-based, styrene acrylic polymer-based elastomeric waterproofing coating that forms a durable and impervious protective layer over suitable concrete surfaces.

UltraTech Hi-Flex is designed for high-risk areas where surfaces are exposed to rain, weather and water contact. Its flexible coating can elongate up to 100%, helping accommodate movement in the substrate and reducing the possibility of cracks in the waterproofing layer. UltraTech also states that Hi-Flex can withstand water pressure of up to 7 bars under specified test conditions.

UltraTech Hi-Flex Waterproofing for Terraces and Roofs

UltraTech Hi-Flex Waterproofing Coat is suitable for positive-side exterior waterproofing applications such as terraces, sloping roofs, exterior walls, balconies and domes. It is designed to create a continuous waterproofing layer that helps prevent water and dampness from entering the structure.

The product can be applied over suitable old and new concrete surfaces after proper surface preparation. For exposed areas such as roofs and terraces, UltraTech recommends an appropriate system of application and protective top screed where required.

UltraTech Hi-Flex Waterproofing Applications

UltraTech Hi-Flex 12kg can be used for several high-risk waterproofing applications, including:

• Terrace waterproofing
• Sloping roof waterproofing
• Exterior wall waterproofing
• Balcony waterproofing
• Dome waterproofing
• Swimming pool waterproofing
• Sump tank waterproofing
• Concrete surface waterproofing

UltraTech’s current product information identifies Hi-Flex as a waterproofing coating for external wet areas including terraces, roofs and exterior walls. Its product documentation also identifies applications such as swimming pools and sump tanks.

UltraTech Hi-Flex 12kg Coverage

The UltraTech Hi-Flex 12kg pack is designed for waterproofing applications where a flexible protective coating is required. The product packaging indicates coverage of up to approximately 70 sq.m for the 12kg pack, while actual coverage depends on surface condition, application thickness, number of coats and site conditions.

UltraTech technical information specifies approximately 5–6 sq.ft per kg of combined product at 1 mm dry film thickness in two coats. Coverage should therefore be treated as an application guideline rather than a guaranteed area figure.

UltraTech Hi-Flex Two-Component Waterproofing System

UltraTech Hi-Flex Waterproofing Coat is a two-component system consisting of a powder component and a liquid polymer component. The components are mixed before application to produce the waterproofing coating.

UltraTech’s technical information specifies a mix ratio of approximately 1.4 parts powder to 1 part liquid by weight. The mixture should be prepared in a lump-free consistency using a suitable mechanical stirrer. Only the quantity that can be consumed within the specified pot life should be mixed.

How to Apply UltraTech Hi-Flex

Before applying UltraTech Hi-Flex Waterproofing Coat, the concrete surface must be properly prepared. Remove dirt, dust, oil, laitance and other bond-inhibiting materials. UltraTech recommends suitable cleaning methods such as wire brushing and jet washing. Any structural issues should be addressed before waterproofing, and non-structural cracks should be suitably treated.

The prepared surface should be brought to a saturated surface dry condition without standing water. Mix the powder and liquid components thoroughly using a mechanical stirrer until a lump-free consistency is achieved.

Apply UltraTech Hi-Flex using a stiff nylon brush in two coats. The second coat should be applied perpendicular to the first coat after the recommended interval. UltraTech’s product guidance specifies a minimum gap of approximately 8 hours between coats under normal climatic conditions.

For exposed areas such as terraces and roofs, a suitable protective screed or finishing system may be required after the waterproofing coating has cured. Follow the manufacturer’s application instructions for the specific project.

100% Elongation and Flexible Waterproofing Protection

One of the key characteristics of UltraTech Hi-Flex Waterproofing Coat is its flexibility. UltraTech states that Hi-Flex can elongate up to 100% under the specified test condition. This flexibility helps the waterproofing coating accommodate movement and reduces the possibility of cracks forming in the protective layer.

This makes UltraTech Hi-Flex 12kg suitable for areas exposed to changing environmental conditions, temperature movement and repeated water contact where a flexible waterproofing coating is required.

Water Resistance of UltraTech Hi-Flex

UltraTech Hi-Flex provides positive-side waterproofing protection and is specified to withstand water pressure up to 7 bars under the manufacturer’s stated test conditions. The coating forms a durable and impervious layer that helps prevent water ingress into the structure.

The product is therefore suitable for high-risk areas such as terraces, roofs, exterior walls, swimming pools and sump tanks when the surface is properly prepared and the coating is applied according to the manufacturer’s system requirements.

Benefits of UltraTech Hi-Flex Waterproofing Coat

UltraTech Hi-Flex Waterproofing Coat 12kg provides several features for construction waterproofing applications. Its polymer-based formulation creates a flexible and impervious coating. The product is designed to provide better protection against dampness, help prevent plaster and structural damage caused by water ingress, and improve durability of the waterproofed area.

• Flexible waterproofing coating
• Up to 100% elongation under specified test conditions
• Water resistance up to 7 bars under specified test conditions
• Durable and impervious protective coating
• Suitable for positive-side waterproofing
• Suitable for exterior and high-risk wet areas

UltraTech Hi-Flex 12kg Product Details

The UltraTech Hi-Flex Waterproofing Coat 12kg is a two-component cement-based polymer waterproofing system. The final coating provides a smooth, breathable finish. UltraTech technical information specifies a pot life of approximately 2 hours and application by brush.

The product is designed for waterproofing suitable concrete surfaces and should be applied only after proper surface preparation. For best results, follow the recommended mixing ratio, coating thickness, curing and water-ponding test procedure provided by UltraTech.

Buy UltraTech Hi-Flex Waterproofing Coat 12kg

UltraTech Hi-Flex Waterproofing Coat 12kg is suitable for contractors, builders, waterproofing professionals and construction projects requiring a flexible polymer-based waterproofing coating.

Use UltraTech Hi-Flex for terraces, sloping roofs, exterior walls, balconies, domes, swimming pools and sump tanks where positive-side waterproofing protection is required.

For proper performance, prepare the surface correctly, mix the two components according to the manufacturer’s specified ratio and apply the required coats with the recommended interval between coats.

Buy UltraTech Hi-Flex Waterproofing Coat 12kg from Lakshmi Associates for professional construction waterproofing applications.