UltraTech WP+200 200ml Waterproofing Liquid is an integral waterproofing liquid designed to be mixed with cement for suitable concrete, mortar and plaster applications. It is developed to help reduce water penetration and dampness in building structures and can be used during different stages of construction, from foundation work through finishing applications.

UltraTech WP+200 200ml Waterproofing Liquid for Construction

UltraTech Weather Pro WP+200 uses Water Block Technology to help fill tiny openings within concrete, plaster and mortar and reduce the interconnectivity of capillaries. This helps reduce water penetration through the cement-based material and provides an integral approach to waterproofing rather than being used simply as a surface coating. :contentReference[oaicite:1]{index=1}

The product can be added to concrete, mortar and plaster and is suitable for several construction applications. UltraTech specifies its use for foundation concreting, beams, columns, brick joining, and internal and external plastering. This makes UltraTech WP+200 200ml Waterproofing Liquid suitable for different stages of building construction where cement-based mixes are used. :contentReference[oaicite:2]{index=2}

200ml Waterproofing Liquid for 50kg Cement

The recommended dosage is 200 ml of WP+200 for every 50 kg bag of cement. UltraTech’s application guide recommends mixing the cement, sand and aggregates according to the required mix design, initially adding approximately 50% of the required water. WP+200 is then mixed with the remaining water before being combined with the prepared concrete, plaster or mortar mixture. :contentReference[oaicite:3]{index=3}

UltraTech also states that using WP+200 can reduce the water requirement by approximately 10–15%, with water added according to the required consistency. The recommended dosage should be followed because using a lower dosage may not provide effective waterproofing performance. Good construction practices, including appropriate curing, should also be followed. :contentReference[oaicite:4]{index=4}

Applications of UltraTech WP+200

UltraTech WP+200 200ml Waterproofing Liquid can be used in foundation concreting, beams, columns, brick joining, internal plastering and external plastering. It is designed as an integral waterproofing additive for cement-based construction materials and can therefore be incorporated into concrete, mortar and plaster mixes according to the intended application. :contentReference[oaicite:5]{index=5}

The 200 ml pack is particularly suitable where the required dosage is based on a 50 kg cement bag. The supplied pack configuration contains 60 units of 200 ml, making it suitable for construction-material supply and project requirements where multiple small-dose packs are required.

Product Characteristics and Storage

According to UltraTech’s technical data sheet, WP+200 is a free-flowing liquid with a reddish-brown colour, a specific gravity of 1.10–1.15 and a pH value of 8–10. The technical data sheet also specifies a 24-month shelf life from the date of manufacture when stored in a cool and dry place. :contentReference[oaicite:6]{index=6}

UltraTech’s technical documentation states that the product’s technical parameters are based on laboratory testing and may vary depending on the raw materials, mix design and actual site application conditions. A trial for product suitability is recommended before full-scale use. :contentReference[oaicite:7]{index=7}

UltraTech WP+200 for Better Dampness Protection

For construction projects requiring an integral waterproofing additive for cement-based mixes, UltraTech WP+200 200ml Waterproofing Liquid provides a practical solution for concrete, mortar and plaster applications. Its specified dosage, multiple construction applications and 200 ml pack format make it convenient for projects requiring controlled addition to cement-based mixes.

Before use, check the required cement quantity, dosage, mix design and application method. Following the manufacturer’s recommended dosage and construction practices is important for achieving the intended waterproofing performance. :contentReference[oaicite:8]{index=8}