UltraTech WP+200 10L Waterproofing Liquid

UltraTech WP+200 10L Waterproofing Liquid is an integral waterproofing liquid designed to be used with cement in concrete, mortar and plaster applications. UltraTech Weather Pro WP+200 can be used at different stages of construction, from foundation work to finishing. It is suitable for foundation concreting, beams, columns, brick joining, internal plastering and external plastering.

The UltraTech WP+200 10L Waterproofing Liquid is mixed with cement-based construction materials to help reduce water penetration and protect against dampness. UltraTech’s Water Block Technology helps fill tiny holes in concrete, plaster and mortar, reducing the interconnectivity of capillaries and helping limit water penetration.

UltraTech WP+200 10L for Cement Waterproofing

UltraTech WP+200 is an integral waterproofing additive rather than a surface-applied waterproofing coating. It is added to cement-based concrete, mortar or plaster during mixing. This makes UltraTech WP+200 10L suitable for construction work where waterproofing protection is required as part of the cement-based mix.

The 10L pack provides a larger quantity for construction projects, contractors and regular building applications. The product can be incorporated into different cement-based mixes according to the manufacturer’s recommended dosage and application procedure.

UltraTech WP+200 10L Applications

UltraTech WP+200 10L Waterproofing Liquid can be used for a wide range of construction applications, including:

• Foundation concreting
• Concrete beams
• Columns
• Brick joining
• Internal plastering
• External plastering
• Concrete applications
• Mortar applications

UltraTech states that WP+200 can be used at different construction stages, from foundation to finishing. This makes it suitable for use with cement-based concrete, mortar and plaster throughout building construction.

UltraTech WP+200 10L Dosage and Coverage

The recommended dosage of UltraTech WP+200 is 200 ml per 50 kg bag of cement, depending on the cement type. A 10L pack contains 10,000 ml of product. At the recommended dosage, a 10L pack provides approximately 50 doses.

Based on the manufacturer’s 200 ml per 50 kg cement dosage, 10L of WP+200 corresponds to approximately 2,500 kg of cement, equivalent to approximately 50 bags of 50 kg cement. This is a dosage-based calculation, not a guaranteed site coverage figure. Actual consumption can vary according to the cement type, mix design and site conditions.

How to Use UltraTech WP+200 10L

For using UltraTech WP+200 10L Waterproofing Liquid, first prepare the concrete, mortar or plaster mix according to the required mix design. Mix the cement, sand and aggregates and add approximately 50% of the required water. Mix for around 2–3 minutes.

Next, add the required quantity of UltraTech WP+200 to the remaining 50% of the water and stir thoroughly. For every 50 kg bag of cement, use 200 ml of WP+200. Add the WP+200 water mixture to the prepared concrete, mortar or plaster mix and mix properly.

UltraTech states that WP+200 can reduce water requirements by approximately 10–15%. Water should therefore be adjusted according to the required consistency rather than simply adding the original full water quantity. Follow appropriate construction practices, including curing, for the intended waterproofing application.

Water Block Technology of UltraTech WP+200

UltraTech WP+200 Waterproofing Liquid features Water Block Technology. According to UltraTech, this technology helps fill tiny holes in concrete, plaster and mortar and breaks the interconnectivity of capillaries. This helps reduce water penetration through cement-based construction materials.

Because WP+200 is an integral waterproofing liquid, it is incorporated into the cement-based material during mixing. It is therefore suitable for applications where waterproofing protection needs to be integrated into concrete, mortar and plaster.

Benefits of UltraTech WP+200 10L

UltraTech WP+200 10L is designed to help improve protection against dampness when used at the recommended dosage. UltraTech lists benefits including better dampness prevention, rust prevention, increased durability and prevention of plaster damage.

The manufacturer’s technical data sheet also reports increased workability and cohesion with the addition of WP+200. Under specified laboratory test conditions, compressive strength increased by up to 15%. Actual performance may vary depending on the cement, raw materials, mix design and site application conditions.

UltraTech WP+200 10L Product Specifications

The UltraTech WP+200 10L Waterproofing Liquid is supplied in a 10L pack. UltraTech’s technical data sheet describes WP+200 as a free-flowing liquid with a reddish-brown colour. The stated specific gravity is 1.10–1.15, pH is 8–10 and total solids are 26% ±1%.

UltraTech lists WP+200 in multiple pack sizes including 200 ml, 1L, 5L, 10L, 20L, 50L and 100L. The 10L pack is intended for applications requiring a larger quantity of integral waterproofing liquid.

UltraTech WP+200 10L Storage and Shelf Life

Store UltraTech WP+200 10L Waterproofing Liquid in a cool and dry place. The manufacturer’s technical data sheet specifies a shelf life of 24 months from the date of manufacture. Gloves are recommended during handling, and any product splashes on the skin or eyes should be washed with clean water immediately.

Buy UltraTech WP+200 10L Waterproofing Liquid

UltraTech WP+200 10L Waterproofing Liquid is suitable for contractors, builders, construction professionals and building projects requiring an integral waterproofing additive for cement-based concrete, mortar and plaster.

Use UltraTech WP+200 10L for foundation concreting, beams, columns, brick joining, internal plastering and external plastering according to the manufacturer’s recommended dosage. For the standard dosage, use 200 ml per 50 kg of cement and follow the recommended mixing and curing procedure.

Buy UltraTech WP+200 10L Waterproofing Liquid from Lakshmi Associates for construction and cement waterproofing applications.