UltraTech WP+200 50L Waterproofing Liquid

UltraTech WP+200 50L Waterproofing Liquid is an integral waterproofing liquid designed to be mixed with cement for concrete, mortar and plaster applications. UltraTech Weather Pro WP+200 can be used at different stages of construction, from foundation work to finishing. It is suitable for foundation concreting, beams, columns, brick joining, internal plastering and external plastering.

The UltraTech WP+200 50L Waterproofing Liquid uses Water Block Technology to help reduce water penetration through cement-based construction materials. UltraTech states that the technology helps fill tiny holes in concrete, plaster and mortar, breaking the interconnectivity of capillaries and reducing water penetration.

UltraTech WP+200 50L for Cement Waterproofing

UltraTech WP+200 is an integral waterproofing liquid that is added to cement-based construction mixes. It is not a surface coating; instead, the product is incorporated into concrete, mortar or plaster during mixing. This makes UltraTech WP+200 50L suitable for larger construction projects where integral waterproofing protection is required across multiple cement-based applications.

The 50L pack provides a larger quantity of WP+200 for contractors, builders and construction projects requiring repeated applications. It can be used for construction work from foundation concreting through plastering and finishing when applied according to the manufacturer’s recommended dosage.

UltraTech WP+200 50L Applications

UltraTech WP+200 50L Waterproofing Liquid can be used for a wide range of cement-based construction applications:

• Foundation concreting
• Concrete beams
• Columns
• Brick joining
• Internal plastering
• External plastering
• Concrete applications
• Mortar applications

UltraTech specifically recommends WP+200 for plaster, mortar and concrete from foundation to finishing, including foundation concreting, beams, columns, brick joining and internal and external plastering.

UltraTech WP+200 50L Dosage and Coverage

The recommended dosage of UltraTech WP+200 is 200 ml per 50 kg bag of cement, depending on the cement type. A 50L pack contains 50,000 ml of WP+200.

At the recommended dosage, a 50L pack provides approximately 250 doses of 200 ml. Based on the manufacturer’s dosage, this corresponds to approximately 12,500 kg of cement, equivalent to approximately 250 bags of 50 kg cement.

This is a dosage-based calculation and should not be considered a guaranteed site coverage figure. Actual consumption can vary depending on cement type, mix design, construction method and site conditions. The manufacturer’s recommended dosage should be followed for effective waterproofing.

How to Use UltraTech WP+200 50L

To use UltraTech WP+200 50L Waterproofing Liquid, first prepare the concrete, plaster or mortar mix according to the required mix design. Mix the cement, sand and aggregates and add approximately 50% of the required water. Mix for around 2–3 minutes.

Next, add the required quantity of UltraTech WP+200 to the remaining 50% of the water and stir well. Use 200 ml of WP+200 for every 50 kg of cement.

Add the WP+200 water mixture to the prepared concrete, mortar or plaster mix and combine thoroughly. UltraTech states that WP+200 can reduce water requirements by approximately 10–15%. Adjust the final water quantity according to the required consistency.

Use the prepared mix according to the intended construction application and follow good construction practices, including proper curing. UltraTech specifically notes that using a lower dosage will not provide effective waterproofing.

Water Block Technology in UltraTech WP+200

UltraTech WP+200 Waterproofing Liquid incorporates Water Block Technology. According to UltraTech, this technology fills tiny holes in concrete, plaster and mortar and breaks the interconnectivity of capillaries, helping reduce water penetration.

Because UltraTech WP+200 50L is an integral waterproofing liquid, it is incorporated into the cement-based material during mixing. This makes it suitable for concrete, mortar and plaster applications where integral protection against water penetration and dampness is required.

Benefits of UltraTech WP+200 50L

UltraTech WP+200 50L is designed to provide integral waterproofing protection when used with cement at the recommended dosage. UltraTech lists benefits including better dampness prevention, better prevention from rusting, enhanced concrete strength, higher durability and denser concrete.

The UltraTech technical data sheet also states that workability and cohesion increase with WP+200. Under specified laboratory test conditions, compressive strength increased by up to 15%. Actual results may vary depending on the cement, raw materials, mix design and site application conditions.

UltraTech WP+200 50L Product Specifications

The UltraTech WP+200 50L Waterproofing Liquid is supplied in a 50L pack. UltraTech’s technical data sheet describes WP+200 as a free-flowing liquid with a reddish-brown colour. The stated specific gravity is 1.10–1.15, pH is 8–10 and total solids are 26% ±1%.

UltraTech lists WP+200 in multiple pack sizes including 200 ml, 1L, 5L, 10L, 20L, 50L and 100L. The 50L pack is designed for larger-volume construction requirements and repeated cement-based waterproofing applications.

UltraTech WP+200 50L Storage and Shelf Life

Store UltraTech WP+200 50L Waterproofing Liquid in a cool and dry place. UltraTech specifies a shelf life of 24 months from the date of manufacture. Gloves are recommended during handling, and any splashes to the skin or eyes should be washed with clean water immediately.

Buy UltraTech WP+200 50L Waterproofing Liquid

UltraTech WP+200 50L Waterproofing Liquid is suitable for contractors, builders and construction projects requiring a larger quantity of integral waterproofing liquid for cement-based concrete, mortar and plaster.

Use UltraTech WP+200 50L for foundation concreting, beams, columns, brick joining, internal plastering and external plastering according to the manufacturer’s recommended dosage and application procedure.

For the standard dosage, use 200 ml of UltraTech WP+200 for every 50 kg of cement. A 50L pack provides approximately 250 doses at this dosage, corresponding to approximately 12,500 kg of cement.

Buy UltraTech WP+200 50L Waterproofing Liquid from Lakshmi Associates for construction and cement waterproofing applications.