UltraTech WP+200 1L Waterproofing Liquid

UltraTech WP+200 1L Waterproofing Liquid is an integral waterproofing liquid designed to be mixed with cement for construction applications. It can be used with concrete, mortar and plaster from the foundation stage through finishing work. UltraTech describes WP+200 as a product using Water Block Technology that helps fill tiny holes in concrete, plaster and mortar, reducing water penetration through interconnected capillaries.

UltraTech WP+200 1L for Construction Waterproofing

The 1L pack of UltraTech WP+200 is suitable for construction work where integral waterproofing protection is required. The product can be incorporated into cement-based mixes rather than being applied as a separate surface coating. It can be used for different stages of building construction, including foundation concreting, beams, columns, brick joining and plastering.

Applications of UltraTech WP+200

UltraTech WP+200 1L Waterproofing Liquid can be used in a variety of cement-based construction applications:

• Foundation concreting
• Beams and concrete work
• Columns
• Brick joining and masonry mortar
• Internal plastering
• External plastering

Its application across concrete, mortar and plaster makes it suitable for use at multiple stages of construction, from foundation work to finishing.

UltraTech WP+200 Dosage and Coverage

The recommended dosage is 200 ml of WP+200 for every 50 kg bag of cement, depending on the cement type. At this dosage, a 1L pack contains approximately five 200 ml doses, equivalent to approximately five 50 kg bags of cement or 250 kg of cement in total. Actual site usage should follow the manufacturer’s recommended dosage and the requirements of the cement and mix being used.

For mixing, UltraTech recommends preparing the concrete, plaster or mortar according to the mix design and initially adding 50% of the required water. WP+200 is then mixed with the remaining 50% water before being added to the prepared cement-based mix. UltraTech states that water requirements may decrease by approximately 10–15% when WP+200 is used, so water should be adjusted according to the required consistency.

Water Block Technology

UltraTech WP+200 uses Water Block Technology to help fill tiny holes in concrete, plaster and mortar. According to UltraTech, this helps break the interconnectivity of capillaries and reduce water penetration. The product is intended to provide better protection against dampness when used at the recommended dosage and with appropriate construction practices.

Benefits of UltraTech WP+200

UltraTech lists benefits including better dampness prevention, better prevention from rusting, enhanced concrete strength, higher durability and better prevention of plaster damage. The technical data sheet also reports that compressive strength increased by up to 15% under its specified laboratory test conditions. Actual results can vary depending on the mix, raw materials and site application conditions.

UltraTech WP+200 1L Product Details

This product is supplied in a 1L pack and is part of the UltraTech Weather Pro WP+200 range. The technical data sheet describes WP+200 as a free-flowing liquid with a reddish-brown colour, a specific gravity of 1.10–1.15 and a pH value of 8–10. The product has a stated shelf life of 24 months from the date of manufacture when stored in a cool and dry place.

For construction projects requiring an integral waterproofing additive for cement-based concrete, mortar and plaster, UltraTech WP+200 1L Waterproofing Liquid provides a convenient larger pack size for multiple applications.

Buy UltraTech WP+200 1L from Lakshmi Associates

Choose UltraTech WP+200 1L Waterproofing Liquid for cement-based construction applications such as concrete, mortar, brick joining and plastering. Use the product according to the manufacturer’s recommended dosage and proper construction practices for the intended waterproofing application.