UltraTech WP+200 5L Waterproofing Liquid

UltraTech WP+200 5L Waterproofing Liquid is an integral waterproofing liquid designed to be mixed with cement for concrete, mortar and plaster applications. UltraTech Weather Pro WP+200 can be used at different stages of construction, from foundation work through finishing applications. It is suitable for foundation concreting, columns, beams, brick joining, internal plastering and external plastering.

The UltraTech WP+200 5L Waterproofing Liquid uses Water Block Technology to help reduce water penetration through cement-based construction materials. According to UltraTech, the technology helps fill tiny holes in concrete, plaster and mortar and breaks the interconnectivity of capillaries, helping reduce the movement of water through the material.

UltraTech WP+200 5L for Concrete, Mortar and Plaster

UltraTech WP+200 can be added to cement-based concrete, mortar and plaster mixes. Because it is an integral waterproofing liquid, it is mixed into the construction material rather than being used as a separate surface coating. This makes UltraTech WP+200 5L suitable for a wide range of building applications where protection against dampness and water penetration is required.

UltraTech WP+200 5L Applications

UltraTech WP+200 5L Waterproofing Liquid can be used for multiple construction applications, including:

• Foundation concreting
• Concrete beams
• Columns
• Brick joining
• Internal plastering
• External plastering
• Cement-based mortar applications

The product can be used at different construction stages, from foundation to finishing, when properly incorporated into the cement-based mix.

UltraTech WP+200 5L Dosage

The recommended dosage for UltraTech WP+200 is 200 ml for every 50 kg bag of cement, depending on the type of cement. A 5L pack contains 5,000 ml of WP+200. At the recommended 200 ml dosage, one 5L pack provides approximately 25 doses, equivalent to approximately 25 bags of 50 kg cement, or 1,250 kg of cement.

Actual material consumption can vary depending on the cement type, mix design, construction method and site conditions. The manufacturer’s recommended dosage should be followed rather than reducing the dosage for additional coverage.

How to Use UltraTech WP+200

For proper application of UltraTech WP+200 5L Waterproofing Liquid, first prepare the concrete, plaster or mortar mix according to the required mix design. Mix the cement, sand and aggregates and add approximately 50% of the required water. Mix this material for around 2–3 minutes.

Next, add the required quantity of UltraTech WP+200 to the remaining 50% of the water and stir well. The WP+200 water mixture can then be added to the prepared concrete, mortar or plaster mix. UltraTech states that WP+200 can reduce water requirements by approximately 10–15%, so additional water should be adjusted according to the required consistency.

After mixing, use the concrete, mortar or plaster according to the intended construction application. Proper curing and standard construction practices should also be followed for effective waterproofing performance.

Water Block Technology in UltraTech WP+200

UltraTech WP+200 Waterproofing Liquid incorporates Water Block Technology. UltraTech explains that this technology helps fill tiny holes within concrete, mortar and plaster and reduces the interconnectivity of capillaries. This helps reduce water penetration through the cement-based material.

The product is therefore designed as an integral waterproofing additive for cement-based construction rather than as a standalone waterproofing coating.

Benefits of UltraTech WP+200 5L

UltraTech WP+200 5L is designed to provide integral waterproofing protection when used with cement at the recommended dosage. UltraTech lists benefits including better dampness prevention, better prevention from rusting, increased durability and prevention of plaster damage.

The UltraTech technical data sheet also reports that workability and cohesion increase with the addition of WP+200. Under the specified laboratory test conditions, compressive strength increased by up to 15%. Actual results may vary depending on the cement, raw materials, mix design and site application conditions.

UltraTech WP+200 5L Product Specifications

The UltraTech WP+200 5L Waterproofing Liquid supplied by Lakshmi Associates comes in a 5L pack. The product supplied by the manufacturer is a free-flowing liquid. UltraTech’s technical data sheet specifies a reddish-brown colour, specific gravity of 1.10–1.15, pH value of 8–10 and total solids of 26% ±1%.

UltraTech lists WP+200 in several pack sizes, including 200 ml, 1L, 5L, 10L, 20L, 50L and 100L. The 5L pack is suitable for projects requiring multiple doses of the waterproofing liquid.

UltraTech WP+200 5L Storage

Store UltraTech WP+200 5L Waterproofing Liquid in a cool and dry place. UltraTech specifies a shelf life of 24 months from the date of manufacture. Proper storage conditions should be maintained to preserve the product until use.

Buy UltraTech WP+200 5L Waterproofing Liquid

UltraTech WP+200 5L Waterproofing Liquid is suitable for contractors, builders, masons and construction projects requiring an integral waterproofing additive for cement-based concrete, mortar and plaster. It can be used for foundation concreting, beams, columns, brick joining and internal or external plastering.

For the recommended application, use 200 ml of UltraTech WP+200 for every 50 kg of cement and follow the manufacturer’s mixing and curing instructions. Lakshmi Associates supplies UltraTech WP+200 5L for construction and waterproofing applications.