UltraTech WP+200 20L Waterproofing Liquid

UltraTech WP+200 20L Waterproofing Liquid is an integral waterproofing liquid designed for use with cement in concrete, mortar and plaster. UltraTech Weather Pro WP+200 can be used across different stages of construction, from foundation work to finishing applications. It is suitable for foundation concreting, beams, columns, brick joining, internal plastering and external plastering.

The UltraTech WP+200 20L Waterproofing Liquid is mixed into cement-based construction materials to help reduce water penetration and improve protection against dampness. UltraTech’s Water Block Technology helps fill tiny holes in concrete, plaster and mortar and reduces the interconnectivity of capillaries, helping limit water penetration through the cement-based material.

UltraTech WP+200 20L for Cement Waterproofing

UltraTech WP+200 is an integral waterproofing liquid that is mixed with cement-based concrete, mortar and plaster. Unlike a surface-applied waterproofing coating, WP+200 is incorporated into the construction mix during preparation.

The UltraTech WP+200 20L pack is suitable for larger construction requirements where multiple doses of waterproofing liquid are required. It can be used for building work from foundation concreting through plastering and finishing.

UltraTech WP+200 20L Applications

UltraTech WP+200 20L Waterproofing Liquid can be used for several cement-based construction applications, including:

• Foundation concreting
• Concrete beams
• Columns
• Brick joining
• Internal plastering
• External plastering
• Concrete applications
• Mortar applications

UltraTech recommends using WP+200 with cement for applications from foundation to finishing. The product is suitable for concrete, mortar and plaster when used according to the manufacturer’s recommended dosage and mixing procedure.

UltraTech WP+200 20L Dosage and Coverage

The recommended dosage of UltraTech WP+200 is 200 ml per 50 kg bag of cement, depending on the type of cement. A 20L pack contains 20,000 ml of WP+200.

At the recommended dosage of 200 ml per 50 kg cement, a 20L pack provides approximately 100 doses. This corresponds to approximately 5,000 kg of cement, or approximately 100 bags of 50 kg cement.

This is a dosage-based calculation and should not be treated as a guaranteed site coverage figure. Actual consumption can vary depending on cement type, mix design, construction method and site conditions. Follow the manufacturer’s recommended dosage for the intended application.

How to Use UltraTech WP+200 20L

To use UltraTech WP+200 20L Waterproofing Liquid, first prepare the concrete, plaster or mortar mix according to the required mix design. Mix cement, sand and aggregates and add approximately 50% of the required water. Mix the material for around 2–3 minutes.

Next, add the required quantity of UltraTech WP+200 to the remaining 50% of the water and stir well. The standard dosage is 200 ml of WP+200 for every 50 kg of cement.

Add the WP+200 water mixture to the prepared concrete, plaster or mortar mix and combine thoroughly. UltraTech states that WP+200 can reduce water requirements by approximately 10–15%. Adjust the final water quantity according to the required consistency.

Use the prepared concrete, mortar or plaster according to the intended construction application. UltraTech also recommends following good construction practices, including proper curing. Using a lower-than-recommended dosage may not provide effective waterproofing.

Water Block Technology of UltraTech WP+200

UltraTech WP+200 Waterproofing Liquid uses Water Block Technology. According to UltraTech, the technology helps fill tiny holes in concrete, plaster and mortar and breaks the interconnectivity of capillaries. This helps reduce water penetration through cement-based construction materials.

This integral waterproofing approach makes UltraTech WP+200 20L suitable for use in cement-based concrete, mortar and plaster where protection against dampness and water penetration is required.

Benefits of UltraTech WP+200 20L

UltraTech WP+200 20L is designed to provide integral waterproofing protection when used with cement at the recommended dosage. UltraTech lists benefits including better dampness prevention, better prevention from rusting, enhanced concrete strength, higher durability and denser concrete.

UltraTech’s technical data sheet reports that workability and cohesion increase with the addition of WP+200. Under specified laboratory test conditions, compressive strength increased by up to 15%. Actual results can vary depending on the cement, raw materials, mix design and site application conditions.

UltraTech WP+200 20L Product Specifications

The UltraTech WP+200 20L Waterproofing Liquid is supplied in a 20L pack. UltraTech’s technical data sheet describes WP+200 as a free-flowing liquid with a reddish-brown colour. The specified specific gravity is 1.10–1.15, pH is 8–10 and total solids are 26% ±1%.

UltraTech lists WP+200 in pack sizes of 200 ml, 1L, 5L, 10L, 20L, 50L and 100L. The 20L pack provides a larger quantity for construction projects requiring repeated applications of integral waterproofing liquid.

UltraTech WP+200 20L Storage and Shelf Life

Store UltraTech WP+200 20L Waterproofing Liquid in a cool and dry place. UltraTech specifies a shelf life of 24 months from the date of manufacture. Gloves are recommended during handling, and splashes to the skin or eyes should be washed with clean water immediately.

Buy UltraTech WP+200 20L Waterproofing Liquid

UltraTech WP+200 20L Waterproofing Liquid is suitable for contractors, builders, masons and construction projects requiring an integral waterproofing additive for cement-based concrete, mortar and plaster.

Use UltraTech WP+200 20L for foundation concreting, beams, columns, brick joining, internal plastering and external plastering according to the manufacturer’s recommended dosage and application procedure.

For the standard dosage, use 200 ml of UltraTech WP+200 for every 50 kg of cement. The 20L pack provides approximately 100 doses at this dosage, corresponding to approximately 5,000 kg of cement.

Buy UltraTech WP+200 20L Waterproofing Liquid from Lakshmi Associates for construction and cement waterproofing applications.