UltraTech Seal & Dry 5 Plus 5L – Acrylic Polymer-Based Multipurpose Bonding Agent

UltraTech Seal & Dry 5 Plus 5L is an acrylic polymer-based multipurpose bonding agent designed for a range of construction, surface preparation, and maintenance applications. It is recommended for crack filling, tile joint filling, priming over plastered surfaces and putty before painting, and anti-corrosive protection of new and old reinforcement bars.

This versatile product can be used in different ways depending on the intended application. When mixed with white cement, it can be used for crack filling and tile joint filling. When mixed with water, it can be applied directly as a priming or key coat over plastered surfaces and putty before painting to help cover minor surface shrinkage cracks.

Acrylic Polymer-Based Multipurpose Bonding Agent

UltraTech Seal & Dry 5 Plus is formulated with an acrylic polymer base and is intended for multiple construction-related applications. Bonding agents are used in construction to support adhesion between compatible materials and surfaces. The product can be considered for repair, surface preparation, and protective coating applications in accordance with the manufacturer’s instructions.

Its multipurpose nature makes it relevant for contractors, painters, builders, and homeowners carrying out surface repairs, tile joint maintenance, and preparation work before painting.

Crack Filling Applications

UltraTech Seal & Dry 5 Plus is recommended for crack filling when mixed with white cement. This combination can be used for filling suitable cracks in compatible surfaces.

For minor surface shrinkage cracks, the product can also be mixed with water and applied as a priming or key coat over plastered surfaces and putty before painting. Proper surface preparation and application according to the manufacturer’s recommendations are important for achieving the intended results.

Tile Joint Filling

Tile joint filling is another stated application of UltraTech Seal & Dry 5 Plus. When mixed with white cement, the product can be used for filling tile joints in suitable applications.

Before using the product for tile joint filling, confirm that the existing tile surface, joint dimensions, and intended application are compatible with the manufacturer’s instructions. The product should not be assumed to replace a dedicated tile grout unless the manufacturer specifically recommends it for that use.

Priming and Key Coat Before Painting

UltraTech Seal & Dry 5 Plus can be mixed with water and applied directly as a priming or key coat over plastered surfaces and putty before painting. This application is intended to help cover minor surface shrinkage cracks.

Preparing a surface before painting is an important step in finishing work. The surface should be assessed for loose material, dust, and other imperfections before application. Follow the recommended dilution, application method, and drying time provided by the manufacturer.

Anti-Corrosive Protection for Reinforcement

UltraTech Seal & Dry 5 Plus can also be used as an anti-corrosive protection coating over new and old reinforcement bars. This makes it relevant for certain concrete repair and structural maintenance applications where reinforcement protection is required.

For reinforcement protection, the surface preparation, coating procedure, and compatibility with the repair system should be confirmed from the manufacturer’s technical documentation. The product should be used only in accordance with the recommended application method.

Packaging and Product Information

UltraTech Seal & Dry 5 Plus is supplied in a 5-litre pack. The provided packaging information specifies 4 units of 5 litres each per carton, giving a total of 20 litres per carton. The stated product weight is 23 kg for the supplied packaged quantity. This weight is not treated as the weight of a single 5-litre container.

The product is categorized under waterproofing, with acrylic base as its subcategory. It can be considered for crack filling, tile joint filling, surface priming, and reinforcement protection applications, subject to the manufacturer’s instructions.

Application and Handling Considerations

• Use the recommended mixing method for the intended application, including white cement or water as specified.
• Prepare the surface according to the manufacturer’s instructions before application.
• Confirm compatibility with the substrate and intended use before starting work.
• Follow the manufacturer’s recommended application procedure, dilution, and drying time.
• Refer to the technical documentation for coverage, storage, and handling instructions.

Why Choose UltraTech Seal & Dry 5 Plus?

UltraTech Seal & Dry 5 Plus is a multipurpose acrylic polymer-based bonding agent for construction and maintenance work. Its stated applications include crack filling, tile joint filling, priming over plastered surfaces and putty before painting, and anti-corrosive protection of reinforcement bars.

For detailed specifications, application procedures, mixing ratios, and product compatibility, consult the manufacturer’s technical documentation or contact the supplier before use.

Product: UltraTech Seal & Dry 5 Plus 5L
Category: Waterproofing
Subcategory: Acrylic Base
Package Size: 5 litres
Carton Quantity: 4 units of 5 litres each